The Authoritative Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results

  1. Need your opinion on crank and bearing (PICS)

    Hi AllJust to give you the background, the existing block I am running is weak. Therefore, I got a seperate engine as backup since I anticipate that existing crank would be spinning bearing soon.Following are the crank pics (Rod only)Following are the rod bearing picsJudging...
  2. No Spark. Found no pulse at Pin 10 of Ecu - EVO III ecu/ wiring - HELP PLEASE

    Dear AllLately, on several occassions, my car started sputtering after cranking, as if running on 2 cylinders. However, it stablized after few seconds. Now the problem is permanent. The car starts, sputters, and shut itself down. I looked at the transistor out towards the coil pack, there was...
  3. 7 Bolt Cranks

    Hello Guys!I read somewhere online that all the 7bolt cranks from Evo 1-3 and Evo 4-9 are the same. Is it so? I tried searching for discussion on this topic but didn't find any.
  4. WTB: Dash AC Vents

    Hey!I am looking for the dash ac vents, all of them, the small ones on both end of the dash board, and bigger center one. I need to the complete working instrument with the option of moving inside vents to left and right, and the outer vents to up and down directions. However, I am located in...
  5. Any one from Riyadh -Saudi Arabia?

    Any member here from the city of Riyadh - Saudi Arabia? I am here for a couple of weeks and would like to meet some fellow member, if there is one.
  6. Built Evo 8 : PT6766 or PT7175 turbo?

    My friend here is building his evo 8, he has already imported a totally built head and block from USA which has costed him a lot of $$$$$ and is waiting for his drivetrain parts. The next thing he has to order is his turbo and manifold. His goals for his evo are around 900hp-1000hp mark.My...
  7. Holset Hx35 vs Evo 8 Twin Scroll 16g

    Guys i am in a dilemma here. At this point my 2g 4g63t is a stock rebuilt, running td04 turbo with a 2g maf, stock fmic, 450cc injectors, 2.5 inch free flow exhaust, upgraded fuel pump, misc gauges, boost controller etc. I intend to change the turbo and the fmic setup. I already have the fmic...
  8. Holset Hx35 on GVR4

    Any one running Holset HX35 on their gvr's? I would like to see some pictures.Thanks!
  9. High Oil Pressure bad for turbo?

    So guys the thing is that after eliminating the balance shafts during my engine rebuild, i am having very high oil pressure. The oil pressure gauge pegs at 100psi when the car goes above 3000rpm on full throttle. At cold its around 80psi, at warmup its around 20psi, but at full throttle the...
  10. Engine start problems

    I have been having this problem for sometime now. I thought i would ask it here. Regardless of the atmosphere temperature, the car takes long cranks, i have to continuously crank it for like 3-4 secs, and repeat it thrice, only then the engine, after missing for the first few miliseconds...
  11. Alternator Problem

    I was reknewing the headlights and fog lights wiring as the old one had become brittle. I had to open the radiator to clean up the hacked wiring mess and use stock routing (beneath the radiator) for the wiring. The wire which comes from the B post of the terminal (+ current) and goes to the...
  12. Galant Detailing/Waxing

    I havent seen any detailed threads on making your G ride shine. Why is that I would like to see what the members here use to shine that metal, clean those lights, sparkle that windshield, blackout those tyres, polishes/wax/paint sealants etc, the methods, tips and tricks in making our cars...
  13. Some pics my friend took

    I did not post any pics of my galant since a long time. For those of you who do not know or do not remember, its a fwd swapped with 4g63t. I thought i would share the pics here. Yayy or Nayy?
  14. Viper Motor Setting?

    Is there any viper motor setting for the front windscreen vipers? It does work but it seems its out of tune. When i turn the vipers on the vipers first move down towards the black windshield cover, then move normally. If i stop them they stop in the center of the windscreen. I would like them to...
  15. Wind Noise From Windshield Corner

    My windshield was replaced recently and now i get some wind noise when i go above 50mph. I noticed that the windshield corner on the driver side (rhd) is sitting a bit high then the left side, which in turn makes the chrome molding on the windshield sit a bit higher then the roof. Is this the...
  16. Dipstick Length (manual 4g63t)

    Can some one kindly tell me the exact length of the engine oil dipstick (only the flexible metal part) for 4g63t? I remember some one posted on this with some pictures but i cannot find the topic.
  17. 4-Pin Tps Adjustment

    I have read about the 3 pin TPS adjustment you guys have in the states, but does any one know about the 4 pin tps? I do not know what values should i see but here they are.Idle : Pin 1 0.09v (black wire) Pin 2 5.04v (Yellow wire with Red Stripe) Pin 3 4.71v (Green wire with Red Stripe) Pin 4...
  18. Help Identify Engine Block

    Okay i am a bit confused here. I saw an engine block which had this number: 4G63TR4662. By this number, it means that its a 4G63 Turbo. What would R mean? I tried searching for it but did not get anything. Is R some random series of the block or is it to specifically identify something, perhaps...
  19. Base Timing

    I have read lot of posts before asking this. What i have understood so far is that to adjust the base timing, i will ground the timing connector on the firewall, adjust the crank pulley to 5 degrees BTDC as per factory manual, take off the grounding clip off the timing connector, start the...
  20. Knock on Hot Start

    I have been lately experiencing some very loud knock when ever i start the car after a long drive, the oil temp would be around 75 degree Celsius or so. Can any one guide me what could be the reason? No i do not have any logging capabilities, sorry Car has an rvr ecu, 2g mas, 450cc injectors...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top