The Authoritative Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results

  1. diambo4life

    Newb with with stripped down vr4

    LMAO. I am obviously retarded. I thought I was on Tuners when I responded to that ^^^^ post. Forgive me. I was tired. :D
  2. diambo4life

    Newb with with stripped down vr4

    Get a "new" harness and restore to stock as much as you can. Junk the MAFT and just run the stock airbox. Jump on the VR4 forums. There's a guy who's always stripping and parting out these cars and you will find all kinds of random things that you need from them.www.galantvr4.orgGood luck.
  3. diambo4life

    SOLD. FS: 91 GVR4 White 27/2000 SHEP TRANS Baltimore, ohio $3500

    Good deal bro. It shouldn't have taken that long.
  4. diambo4life

    Quick & Inexpensive Alternator Heat Shield Solution?

    I relocated mine to the rear years ago and (upgraded it to a GM unit.) It was the best mod I ever did! I literally have never touched it. I have pulled the engine several times with it attached. Hated replacing these damn alternators every year.
  5. diambo4life

    Rowdy 476/2000 Street Build VR4

    Not yet Andrew. Been drivin it on pump gas. No boost action. Its been enjoyable other than the loud ass exhaust. Had to take it apart due to a couple leaky trans seals.....and hope to have it back up and running and leakless by this weekend. I'm not on FB anymore fyi!
  6. diambo4life

    SOLD. FS: 91 GVR4 White 27/2000 SHEP TRANS Baltimore, ohio $3500

    I would not part out. That's a steal for everything you got. Wait for the right buyer. I wish I had room but I have 6 cars haha....
  7. diambo4life

    Rowdy 476/2000 Street Build VR4

    One year later....I guess I was talking about THIS Christmas. :D Put a few miles on it this past weekend.
  8. diambo4life

    New to the forum? Introduce yourself here.

    Welcome. Share your build on here. There's lots that can be done to these cars (ahem) if you spend enough time and money on them. :D
  9. diambo4life

    WTB/WTT: 92 or 93 taillights.

    Anyone have the pre 91s? I personally don't like the 93s.
  10. diambo4life

    Question on oil pump change in car?

    Yes, you should replace the entire oil pump housing and you can pull it out without pulling the engine. You will need to remove the oil pan as one of the "legs" of the oil pickup is mounted to one of the main bolts.It should be as straight foward as doing a timing belt job. Only difference is...
  11. diambo4life

    FS: 1991 Galant VR4 $15,000

    I don't get notifications unless you PM me directly.
  12. diambo4life

    Galant vr-4

    Looking goog homie.....
  13. diambo4life

    FS: 1991 Galant VR4 $15,000

    That was a gift from @jnava . It stays with the car lol.
  14. diambo4life

    Can someone identify this shock setup?

    Hypercoil springs. Honestly...not a bad setup for $100+ shipping. The springs alone are worth it if they don't have a crazy rate.
  15. diambo4life

    FS: 1991 Galant VR4 $15,000

    I still have my Galant for sale. Serious inquiries only. I am in Edmond Oklahoma. https://www.dsmtuners.com/marketplace/modified-galant-vr4-for-sale.1985/
  16. diambo4life

    461/1000

    You get this car running? :D
  17. diambo4life

    Hard to believe I kept my VR4

    Mine has been sitting pretty close to 10 months now and I can't stand it. It runs...just has a non working trans. I start it up every couple weeks or so.
  18. diambo4life

    (NO LONGER NEEDED) WTB: 91-92 Galant GSX Transmission or VR4 Transmission and Rear Diff

    I would be interested in that trans if all it needs is a center diff.
  19. diambo4life

    Wtb twin pot front calipers

    I have a set of front 2G stuff in my garage. Shoot offer.
  20. diambo4life

    Well, I boogered up a 35 dollar seal

    You really don't need a tool to install the rear main seal. Most important is to make sure you orient the seal metal retainer correctly. It has a small hole on one of the lips that should face down.
  21. diambo4life

    New GalantVR4.org Shirts and Merchandise for 2022

    Ordered a Hoodie. Sweet.
  22. diambo4life

    Wrong Timing Belt Pulley Installed?

    That is a blind hole IIRC. That is for bolting the cover to the block and typically uses the biggest bolt. The one that needs RTV looks like it has already been installed? It's early morning so I could be tripping.
  23. diambo4life

    USDM bumpers to JDM bumpers E39A

    Exactly. I personally got one of Curtis's L brackets. They were perfect for my install. Gave me a chance to mount my FMIC much better than it ever was. See my av.
  24. diambo4life

    1991 Summit White Partout *UPDATED Oct 2022*

    Transmission? Location?
  25. diambo4life

    Scirocco radiator question

    As someone who uses a Scirocco radiator and a good SPAL fan....it is a great combination for a true street driven car. How your Amazon sourced unit works? Only one way to find out....
  26. diambo4life

    Rowdy 476/2000 Street Build VR4

    I have a welded center diff enroute so maybe I can drive this POS before Christmas. :)
  27. diambo4life

    Shifter bushings?

    Very helpful DSSA! Thanks. My shifter is the worst.
  28. diambo4life

    Shifter bushings?

    I really need just the set sandwiching the shifter to limit the east west movement. I really amaze myself how I bang gears in this car with such a sloppy shifter.
  29. diambo4life

    Coolant issues

    How did you determine it was the head? Did you also rule out the block?
  30. diambo4life

    Rowdy 476/2000 Street Build VR4

    No, I sure don't. I have it on DSMTuners though.
  31. diambo4life

    Hard to believe I kept my VR4

    16 years? I couldn't go 1 year!
  32. diambo4life

    Member Cars section - do you want one?

    I did, but could we get a different option other than Drag, Rally and Road course? Maybe Other...? Some of us are not really building our cars for any specific category and are just fun street builds. Other people do it for roll racing etc.
  33. diambo4life

    Rowdy 476/2000 Street Build VR4

    This is the Build Thread for My 91 GVR4 #476/2000 Street Build. Reply below.
  34. diambo4life

    Coolant issues

    Here is what you need to do:1. Is your engine oil contaminated with coolant? Remove your oil cap after getting the car to temperature and check for milkshake like residue on the bottom of the cap. 2. Are your fan(s) operating correctly? Is your cooling system holding pressure? 3. Is there...
  35. diambo4life

    Member Cars section - do you want one?

    Good idea.
  36. diambo4life

    Exhaust Manifold 411(T3 to TD05h/TD05 adapter)

    I can sell you a nice T4 manifold for $450 shipped. Message me.
  37. diambo4life

    736/2000

    I approve. Solid execution.
  38. diambo4life

    i need adult approval

    I would inspect and make sure your ring lands are ok but those pistons look fine to me. I would run the stock longblock as is sans some mild cams like HKS 264s or equivalent. Everything else is fine....stock valvetrain as well. Just make sure they're in GOOD condition. The stock engine is really...
  39. diambo4life

    i need adult approval

    Hi. What is the goal for this build?
  40. diambo4life

    Headlight intake air dam... Who's done it?

    Quoting cupajoe: Looking to find a way to lower my intake temps at the track, couple option.2. Cut a hole where the battery use to be and add a 90* elbow from the current location and into the wheel well.ME.
  41. diambo4life

    Trying to squeeze an S362 in

    It's a hard decision but trust me on this. You really don't want to modify your car to fit one replaceable part because you spent money to buy it. The part should be correctly matched to fit the vehicle. I can tell you right now your decision to run the 1G radiator may not be a wise one when you...
  42. diambo4life

    Trying to squeeze an S362 in

    You may be better off selling the manifold and getting something that will better fit your setup. Can you take some photos of your working space with the manifold/turbine housing bolted on? Really helps visualizing what you're trying to do.
  43. diambo4life

    1837 in Super Street Magazine

    I will make sure to snag a copy. Congrats buddy.
  44. diambo4life

    jnava

    He is good people. I have spent a few bucks through him.
  45. diambo4life

    New stumble on initial press of accelerator pedal (SOLVED)

    Add more fuel to those cells where it's stumbling and see whether the issue lessens or gets worse.
  46. diambo4life

    Radiator Fan Configuration Change

    I will do that. Since like an easy way to get it done. Thanks.
  47. diambo4life

    Radiator Fan Configuration Change

    Hi, I am wondering whether anyone here has wired their radiator fan to be "always on" with the car running and how you accomplished this? I have a very unreliable trigger for the fan (stock setup) and I just want to rewire the fan to this spec so I do not have to worry about whether it's on or...
  48. diambo4life

    My lip

    I like it too. Would like to see it on the car.
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top