Hello,I have an eprom ecu board here with an strange problem.TMO logger can Connect with the ecu. I See „federal ecu“ in the first screen, I can switch the fuel pump on.One driver ic is bad , I think it was 105, is dead. But i have no isc so thats no problemBut car wont start. Battery...

More amps are always good 😀

I found the part even cheaper here local in Austria. 😀

Yea it‘s a very nice car. Had the same, but as an E88A2,5L V6 DOHC N/A, 175hp and 4wd 4ws with Electronic ride Control (soft/sport) when I was 18… dumbass sold it bc i dont know how to repair/ maintenance..I hope you enjoy this very cool car ;)

Hello. I dont know if they ship international, but here is the part from germany for example.https://www.partsbit.de/autoteile/fensterheber-tur-hinten-rechts-3835104.htmlRear rightGreetings

No this Radio should work without an amp. I had the same connectors in my wiring loom.EDITFound the pinout, from 3000GT Radios

Hello, i found in my Parts storage an MAF Sensor. It has an 7 pin plug compared to our N/A 6pin plug i often seen here.It also looks bigger than my other MAF with 6pin, especially the unmetered lower part.Is this die the same size like an turbo maf?

Thank you. I will try that. I use Pin 23 from the ecu (maf Supply 5V).EDITI tried it and all led‘s are working;) thx

Is there any way to test this boost gauge? I want to use this in my EU Galant, but i dont find many informations about this thing. There is one wire missing from my ECU connector (PIN3 Turbo Gauge), but are there other things what i need to change?Thanks

Sorry,I know its a very old Thread, but were is the buzzer hidden? I forget the light sometimes and mine Dont make a noise..

Hello,anyone has the whole clutch and breakpedal stuff for sale? I Need the whole thing because i want to go for an hydraulic system.. 4g32 has a cable type. Needs to be shipped international to austriaGreetings Martin

Follow this line and you find the clutch slave cylinder. There is a bleeder.

My 1989 has a cableIf you have no fuel in the Reservoir Check under the floor inside the car..

Looks great!! I hope international shipping is possible too, I would take 2

Hello,i did the ABS delete a time ago (abs unit out, new prop valve on the firewall and new lines for the fronts) and now i want to install SS breaklines. Now a rear hard line broke and i found something new. There is a rear prop valve and a abs delay block. Should i just uninstall both and...