DSSA
(Old-Head)
12/17/18 02:38 PM
FS: '92 Kensington Grey GVR4 Partout

With the aspect of continuing to rebuild the new site for www.jnztuning.com I'm realizing that there's only so many projects I'm going to get on over the near future.

That said, I'm going to part out the roughest of my GVR4s (primered in some areas of the rear body which were not fixed to my liking).

The 4-bolt rear is currently sold, and the 5-lug hub conversion, front axles and prop shaft as well.

Other than that, the rest of the car is up for grabs.

Please email me at [email protected] with your needs.

Thanks!


MirageArt01
(Newbie)
12/17/18 03:28 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Do you have the front 4 bolt knuckles?

Chaka_786
(Newbie)
12/17/18 03:43 PM
Re: FS: '92 Kensington Grey GVR4 Partout

do you have the vr4 front bumper support and triangluar fog light brackets?

DSSA
(Old-Head)
12/18/18 10:46 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting MirageArt01:

Do you have the front 4 bolt knuckles?




Sorry, this car has a 5-bolt hub swap on it, which may already be spoken for.

I'll dig around the shop to see if there are any 4-lug setups up there.


DSSA
(Old-Head)
12/18/18 10:47 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting Chaka_786:

do you have the vr4 front bumper support and triangluar fog light brackets?




I may have these on another GVR4 that I have in storage that I'm considering going FMIC on when/if I ever get time to get back on that car.

The bumper may be cost-prohibitive to ship through.

Josh


thomcasey
(I ain't no puny human)
12/18/18 12:02 PM
Re: FS: '92 Kensington Grey GVR4 Partout

How is the hood? My KG needs a good painted hood

1941Galant
(Will fight mice for food)
12/18/18 04:10 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Do you have front fender liners for that car? If so, I'll take them. I need a windshield washer bottle and pump too.

pot
(It's a twee shaker----choot him choot him)
12/18/18 11:01 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Josh, this is nonsense. You keep your car.

DSSA
(Old-Head)
12/19/18 09:29 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting thomcasey:

How is the hood? My KG needs a good painted hood




The hood is white, and is beat. Sorry. That's most likely a trash item.


DSSA
(Old-Head)
12/19/18 09:30 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting pot:

Josh, this is nonsense. You keep your car.




Pot,

No worries. I have more. ;-)

This one is just a little too much work to bring back.


thomcasey
(I ain't no puny human)
12/19/18 09:58 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting DSSA:

Quoting thomcasey:

How is the hood? My KG needs a good painted hood




The hood is white, and is beat. Sorry. That's most likely a trash item.




It was worth a shot. Thanks anyway and good luck with the PO.


91vr4
(Member ++)
12/24/18 05:47 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Engine harness price?

GotInsulin
(Junior Member)
12/26/18 09:45 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Josh-
Any great-to-perfect front USDM bumpers in the stash? Beam is optional. I'm down in Willow Grove if so. Thx


DSSA
(Old-Head)
12/30/18 10:25 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Do you mean "perfect" as in "not cut/damaged", or as in "with perfect paint"?

I have this one up on the lift and will be checking things/starting to strip it today and tomorrow.

Josh


4g63rwd
(Junior Member)
12/30/18 11:42 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Do you have a non cruise throttle cable, manual steering rack, and dual piston front brakes available?

DSSA
(Old-Head)
12/30/18 11:45 AM
Re: FS: '92 Kensington Grey GVR4 Partout

This car has cruise control and power steering still.

The dual piston front calipers are still available.

Josh


DSSA
(Old-Head)
12/30/18 11:47 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting 91vr4:

Engine harness price?




I need to get the engine out before I can see what kind of condition it is in.

I just took a video of a cold-start of the engine, and have to do a compression test yet (my trusty, Snap-On compression tester seems to have taken a crap), then I'll yank it out and let you know.


GotInsulin
(Junior Member)
12/30/18 10:46 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting DSSA:

Do you mean "perfect" as in "not cut/damaged", or as in "with perfect paint"?

I have this one up on the lift and will be checking things/starting to strip it today and tomorrow.

Josh [/quote

Josh, more as in vein of not cut/damaged. Paint is less of a priority in my mind as my car is black. Thx.

91vr4
(Member ++)
01/01/19 01:19 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting DSSA:

Quoting 91vr4:

Engine harness price?




I need to get the engine out before I can see what kind of condition it is in.

I just took a video of a cold-start of the engine, and have to do a compression test yet (my trusty, Snap-On compression tester seems to have taken a crap), then I'll yank it out and let you know.




Sounds good. Do you also have ebrake cables?
And also curious in the transmission.


DSSA
(Old-Head)
01/01/19 03:59 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting GotInsulin:

Quoting DSSA:

Do you mean "perfect" as in "not cut/damaged", or as in "with perfect paint"?

I have this one up on the lift and will be checking things/starting to strip it today and tomorrow.

Josh [/quote

Josh, more as in vein of not cut/damaged. Paint is less of a priority in my mind as my car is black. Thx.




I've got an uncut bumper cover here (support is cut, but not the bumper cover itself--foam backing is still there as well) in Nile Black.

I can get pictures in the light tomorrow if you're interested in it.

Josh


DSSA
(Old-Head)
01/01/19 04:01 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Quoting 91vr4:

Quoting DSSA:

Quoting 91vr4:

Engine harness price?




I need to get the engine out before I can see what kind of condition it is in.

I just took a video of a cold-start of the engine, and have to do a compression test yet (my trusty, Snap-On compression tester seems to have taken a crap), then I'll yank it out and let you know.




Sounds good. Do you also have ebrake cables?
And also curious in the transmission.




I'll check the cables to see if they're free and working.

The transmission is an unknown variable. It came in the car and I've never driven it more than right around the house. No noises, and the car moves fine, but I can't tell you an honest opinion of how it would shift unload high load as I've never done that with it.


********EDIT*******: The transmission is *not* for sale. I just drained it to drop the front end of the car out and there was way too much metal flake to sell it as a working transmission.


4g63rwd
(Junior Member)
01/14/19 05:40 AM
Re: FS: '92 Kensington Grey GVR4 Partout

How much for these parts?

RayH
(Senior Member)
01/16/19 04:43 PM
Re: FS: '92 Kensington Grey GVR4 Partout

How's the driver's side front door?

JR92
(Newbie)
06/14/19 09:50 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Do you have the exhaust for the car?

slugsgomoo
(god hates stupid people)
06/14/19 10:57 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Doglegs?

1836d
(Junior Member)
06/20/19 01:04 AM
Re: FS: '92 Kensington Grey GVR4 Partout

Hey I need the coil pack and the A/C pulley with the adjustable backet

flag24
(Newbie)
06/20/19 05:38 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Kg grille still available? Price please.

Stevenoly
(Newbie)
07/29/19 07:29 PM
Re: FS: '92 Kensington Grey GVR4 Partout

Looking for the L/H rear dogleg trim along with the c-pillar trim shipped to 98275. E-mail sent as well.

boostme
(Junior Member)
07/29/19 11:46 PM
Re: FS: '92 Kensington Grey GVR4 Partout

OP hasn't logged in since Feb. Maybe contact JNZ to see who was parting it out


Contact Us | Privacy statement GalantVR-4.org

Generated in 0.007 seconds in which 0.004 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page