NateCrisman
(Fisheye Hoodpins)
12/23/15 08:48 PM
Partout: #1365/2000 Black 91 CRASHED

Updated 3/22 (most everything aftermarket is sold)...rest is on performancepartout.com

Just picked up a 91 Black non-sunroof GVR4 today to part out...it was crashed HARDCORE.

DO NOT EVEN START UP WITH THE "SAVE IT" BS







Some of the stuff that Iv dug into thus far today: (will get photos, and everything up on my website ASAP: PerformancePartout.com Will update thread once I get the heap off trailer and onto lift to work on it properly.



-6SS fuel inlet line from filter to rail

3" CM catback exhaust

High flow Cat..magneflow

16g turbo Evo3 turbine housing (looks like has a chipped compressor wheel blade though...gotta get it off and inspect. but spins free)

Nelson still has this motor, pending welding repair for me The motor is supposed to be the typical "low mileage JDM cyclone" Looks like the front trans bolt "ear" cracked off and will need to be welded. I pulled valve cover, it's pretty clean in there. stock HG, stock head studs, stock cams....so I don't expect shenanigans.


Trans still here...useable for internal parts only...the cases have cracks or torn out threaded holes in multiple spots. $150 Trans I believe is original, will have to see what VIN stamp says. Has the original 3bolt rear in the car, Im not even going to bother taking any of that out.


Interior is in very rough shape anyway and being in a junkyard for weeks with no windows didn't help, there is very little Im going to bother taking other than the ECU, gauge cluster, a few random plastics and the engine wiring harness. Body is obviously demolished....I'll save door moldings, dogleg, fender moldings, tail lights, ect. Everything front doors forward is scrap.

Brakes look new...nice rotors and calipers. Suspension is stock junk. Wheels are stock black 91 wagon wheels. Maybe save the 4 lug hubs (although i have like 2 sets in stock already that none wants)

Pour one out for this galant. I hear driver wasn't seriously hurt, which I guess is the best news of the whole deal.


SOLD: ETS intake pipe
SOLD Coil on plug kit
SOLD Cyclone intake (pending no damage)
SOLD RC 550 injectors
SOLD Buschur bolt on SX fuel pressure regulator
SOLD 3G MAF with electric plug adapter
SOLD"what's left" of ETS FMIC pipe set...looks like the throttle body elbow/main upper pipe, and the 16g outlet pipe survived. Rest is junk. core is demolished.
SOLD Eprom ECU with key diver chip
SOLDWalbro 255 (hopefully sending unit is nice
SOLD Mitsuishi" red valve cover
SOLDFP exhaust manifold


faqinshiet
(Member +)
12/23/15 09:50 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Super interested in the ets intake!

Gtpdz
(Member)
12/23/15 10:13 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Interested in the 16g

4g6Tree
(Junior Member)
12/23/15 11:31 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Interested in the FP manifold, ETS 16g crossover,and possibly the CM exhaust if the shipping doesn't kill me.

raptorWagon
(less than one year to my birthday)
12/24/15 08:07 AM
Re: Partout: #1365/2000 Black 91 CRASHED

It will buff out!

galantgti
(Junior Member)
12/24/15 08:20 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Save it
Save it
Save it
SAVE IT



transparentdsm
(I have to say something dumb Member)
12/24/15 08:43 AM
Re: Partout: #1365/2000 Black 91 CRASHED

he wasn't hurt to bad, he is alive. it was my brother-in-law. the ecu was rebuilt 3 years ago by ecmlink. how much did you pick the car up for?

NateCrisman
(Fisheye Hoodpins)
12/24/15 12:02 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Well, IMHO I paid too much, since both the block and trans have chunks broken off them at the mounts from the hit. I couldn't see those areas till it was half disassembled.

NateCrisman
(Fisheye Hoodpins)
12/29/15 08:57 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Added links in the first post for the items that have been removed/photographed for sale.

Im getting time crunched, so the motor/trans/turbo/exhaust is still in the car. Im going to florida for a week (www marathon again) from Jan 1 to Jan 11 Be back in the shop on 12th, and then ill start pulling the rest apart.

Also looks like he original badge for this car was #250/2000


belize1334
(well bread and nobly conceived)
12/29/15 01:34 PM
Re: Partout: #1365/2000 Black 91 CRASHED

If the plastic retaining clips for the hood prop are there I'll take those. I'm also looking for the jack accessories (the vinyl bag and bent piece that work with the lug-wrench to make the scissor jack work). Willing to pay reasonable cost + shipping. Oh and the fuel sending unit -- my gauge still won't register full on a full tank so I'm curious to see if a new sending unit will fix the problem...

TravVR4
(Newbie)
12/30/15 04:09 AM
Re: Partout: #1365/2000 Black 91 CRASHED

I might be interested in a few things. I need the plastic trim from the passenger side just in front of the door. In fact, maybe I want both sides and all the other plastics for the rocker moldings. What else..... oh, I don't know..... it is late, I will check your site and get back to you. Where are you located?

TravVR4
(Newbie)
12/30/15 04:13 AM
Re: Partout: #1365/2000 Black 91 CRASHED

never mind.... New Jersey. haha....
Later


car_guy
(Junior Member)
12/30/15 07:41 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Dang it! I didn't see this. I wanted that ETS intake!

NateCrisman
(Fisheye Hoodpins)
12/30/15 08:27 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting belize1334:

If the plastic retaining clips for the hood prop are there I'll take those. I'm also looking for the jack accessories (the vinyl bag and bent piece that work with the lug-wrench to make the scissor jack work). Willing to pay reasonable cost + shipping. Oh and the fuel sending unit -- my gauge still won't register full on a full tank so I'm curious to see if a new sending unit will fix the problem...




I probably have all this stuff from prior partout gallants....Illl check this morning and get back to you asap.


NateCrisman
(Fisheye Hoodpins)
12/30/15 08:33 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting TravVR4:

I might be interested in a few things. I need the plastic trim from the passenger side just in front of the door. In fact, maybe I want both sides and all the other plastics for the rocker moldings. What else..... oh, I don't know..... it is late, I will check your site and get back to you. Where are you located?




I haven't updated the website with any of the stock parts from this car yet....the black body parts and any misc interior/electrical stuff I can save. I generally do it in one big spreadsheet type update after Iv finished pulling parts and have separated the broken junk from the good parts. Unfortunately this one...the vast majority is scrap.


VR6Eater
(ShiftBoots?)
12/30/15 10:19 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Is the front right dogleg intact? I need one.

NateCrisman
(Fisheye Hoodpins)
12/30/15 10:34 AM
Re: Partout: #1365/2000 Black 91 CRASHED

yes, both front fender moldings are ok, the door moldings are ok, and the pass side rear dogleg molding is ok. Driver side dogleg was missing.

I just added these 7 items to inventory, so they are available for online ordering.

PerformancePartout.com


NateCrisman
(Fisheye Hoodpins)
12/30/15 10:38 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting VR6Eater:

Is the front right dogleg intact? I need one.




http://performancepartout.com/fender-molding-gvr4/

There you go. actually have 2 of each side in black on hand.


Kentstatetsi
(Junior Member)
12/30/15 07:17 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Had the intake sitting in my cart wsiting for a response on the remaining piping. Oh well.

NateCrisman
(Fisheye Hoodpins)
12/31/15 06:39 AM
Re: Partout: #1365/2000 Black 91 CRASHED

All that is useable is the throttle body elbow, and the section of upper pipe that has the box flange. Everything else is squashed, I scrapped 5 pieces and the core.

Spyke169
(Member +)
01/01/16 04:15 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Any chance either inner fender splash sheilds survived?

NateCrisman
(Fisheye Hoodpins)
01/01/16 08:06 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Im gone on vacation Jan 1 to Jan 11. Be back in the shop on Tuesday Jan 12, I can check on stuff once Im back.

Isabelledc5
(Newbie)
01/02/16 07:33 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Do you have all 4 engine mount brackets? If they aren't mangled lol. Also looking for the trim that snaps into the roof? Trunk emblems?

NYC86ZC
(30-Something)
01/03/16 09:46 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Hey Nate,

I'll take the power antenna as long as it works without issue.

I checked your site and do not see it posted up there yet.
Thanks.


NateCrisman
(Fisheye Hoodpins)
01/05/16 11:47 AM
Re: Partout: #1365/2000 Black 91 CRASHED

on vacation in florida till 12th. i haven't even looked at the trunk area, car is still sitting on the trailer back in nj. No idea on the power antenna condition, car has no radio and the wiring on the front end of the car is completely severed by the battery. It's going to need to be put into another car to be tested.

NateCrisman
(Fisheye Hoodpins)
01/05/16 11:49 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting Isabelledc5:

Do you have all 4 engine mount brackets? If they aren't mangled lol. Also looking for the trim that snaps into the roof? Trunk emblems?




I have them in stock from other gvr4 partouts, as the mounts on this car are likely bent. But I v got a set for you no trouble.

on vacation till the 12th so I can't ship till Im back home anyway.


rwk4365
(Newbie)
01/05/16 07:42 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Hi--I'm looking for the rear anti-roll motor mount (passenger side)and good OEM flywheel. Will buy complete OEM set if necessary. Please advise.

Ron Komers


Spyke169
(Member +)
01/26/16 08:29 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Looking for both front inner fender splash sheilds. Available?

NateCrisman
(Fisheye Hoodpins)
01/26/16 09:03 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting rwk4365:

Hi--I'm looking for the rear anti-roll motor mount (passenger side)and good OEM flywheel. Will buy complete OEM set if necessary. Please advise.

Ron Komers




Iv got both....ill shoot you a pm


NateCrisman
(Fisheye Hoodpins)
01/26/16 09:04 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting Spyke169:

Looking for both front inner fender splash sheilds. Available?




sorry, both are destroyed. driver side was trashed in the crash. pass side wasn't even there in the first place.


NateCrisman
(Fisheye Hoodpins)
01/26/16 09:17 AM
Re: Partout: #1365/2000 Black 91 CRASHED

just fyi.....this car is on the trailer ready to go to scrap. Today's project is updating inventory #'s on the website for the parts pulled from #1365.

Have quite a few "odd" stuff Ill update here asap


undrpressure23
(Newbie)
01/27/16 11:17 AM
Re: Partout: #1365/2000 Black 91 CRASHED

PM Sent

VR4Scott
(Squeezed Member)
01/27/16 03:29 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Got any trunk trim pieces? All I have are the big side covers and the rear piece around the tail lights.

NYC86ZC
(30-Something)
02/02/16 07:35 PM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting NateCrisman:


on vacation in florida till 12th. i haven't even looked at the trunk area, car is still sitting on the trailer back in nj. No idea on the power antenna condition, car has no radio and the wiring on the front end of the car is completely severed by the battery. It's going to need to be put into another car to be tested.




Nate, were you able to test the antenna?
Thanks.


bagel121
(Newbie)
02/03/16 09:54 PM
Re: Partout: #1365/2000 Black 91 CRASHED

hi I need rocker and inner fender and part of the floors exatly 8 inch in up in the wheel well fron the front to the back 6 inch after the rocker lip on the floor pannel plz for the rebuilt of 1113

Eaglesfly
(Junior Member)
02/05/16 10:39 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Is the cyclone intake still good? Interested in it.

NateCrisman
(Fisheye Hoodpins)
02/08/16 06:54 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting NYC86ZC:

Quoting NateCrisman:


on vacation in florida till 12th. i haven't even looked at the trunk area, car is still sitting on the trailer back in nj. No idea on the power antenna condition, car has no radio and the wiring on the front end of the car is completely severed by the battery. It's going to need to be put into another car to be tested.




Nate, were you able to test the antenna?
Thanks.




When I actually got the trunk open: there was no power antenna at all, was removed by prev owner.


NateCrisman
(Fisheye Hoodpins)
02/08/16 06:55 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting bagel121:

hi I need rocker and inner fender and part of the floors exatly 8 inch in up in the wheel well from the front to the back 6 inch after the rocker lip on the floor pannel plz for the rebuilt of 1113




Sorry, the car is already cut up and dumpstered.


NateCrisman
(Fisheye Hoodpins)
02/08/16 06:56 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting Eaglesfly:

Is the cyclone intake still good? Interested in it.




It was fine...but it sold within a few minutes of going up on my website: www.performancepartout.com


Chadf
(Newbie)
02/14/16 12:03 PM
Re: Partout: #1365/2000 Black 91 CRASHED

I'm in need of a oem fuel tank for my 91 gvr4 mines boarderline and may be leaking price+ shipping to 53818 thanks and also will be need more parts when i dig into the car more

Chadwich
(Renewbie)
02/16/16 09:11 PM
Re: Partout: #1365/2000 Black 91 CRASHED

do you happen to have any MB297860 & MF450406
half shaft bracket bolts and lock washer.
you wouldn't happen to have a old school 20g sitting around?


rbm
(Newbie)
03/22/16 06:36 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Hello Nate, I could use the exhaust system if it is still available, how much? and how far are u from baltimore thanks roger

NateCrisman
(Fisheye Hoodpins)
03/22/16 07:44 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Im about 3 hours from baltimore I think.

Address for shop is:

1028 State Route 94
Blairstown, New Jersey 07825

works for most gps/googlemaps ext to judge distance.

I still have the exhaust from this crashed car here, along with ,maybe 3 other GVR4 exhaust systems to choose through


dkvr4
(Junior Member)
03/22/16 07:51 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Would you happen to have the ets intake pipe? Lmao guess there was more stuff I wanted other than the alternator and o2 housing

NateCrisman
(Fisheye Hoodpins)
03/22/16 08:23 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting Chadwich:

do you happen to have any MB297860 & MF450406
half shaft bracket bolts and lock washer.
you wouldn't happen to have a old school 20g sitting around?




one of the projects I have on my "to do board" is to start up a hardware section on the web site for both "bulk assortments" of cleaned hardware (likely sell by the pound) and separated specific stuff. People are always asking to buy oem mitsu hardware, especially the specific bolts like those jackshaft bolts with the little tips, ect. I may even start offering literally "every bolt on the car" after a partout (something like 40 pounds total!!)

It's on the to-list as shown:


NateCrisman
(Fisheye Hoodpins)
03/22/16 08:28 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Quoting dkvr4:

Would you happen to have the ets intake pipe? Lmao guess there was more stuff I wanted other than the alternator and o2 housing




sorry dude, that sold off website like "right away"


dkvr4
(Junior Member)
03/22/16 12:02 PM
Re: Partout: #1365/2000 Black 91 CRASHED

haha yeah figured as much! lol

Hug
(Newbie)
03/11/17 09:10 AM
Re: Partout: #1365/2000 Black 91 CRASHED

Hi,
I see you have a lot of stuff for sale, by any chance would you have:
a working power antenna
a driver side rear dog leg?
the back (upright part) of the rear seat?
thanks


NateCrisman
(Fisheye Hoodpins)
03/12/17 11:46 AM
Re: Partout: #1365/2000 Black 91 CRASHED

I most likely have the dogleg in black, and I know I have plenty or rear seats on hand.
all my inventory is on performancepartout.com (my site).


tdye2
(Newbie)
04/26/18 02:55 PM
Re: Partout: #1365/2000 Black 91 CRASHED

pm'd

akujiki1987
(Junior Member)
04/26/18 04:08 PM
Re: Partout: #1365/2000 Black 91 CRASHED

I just looked at your site, just want to be super redundant and verify that the doglegs on there are for the rear. Thanks!


Contact Us | Privacy statement GalantVR-4.org

Generated in 0.006 seconds in which 0.003 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page